Shenzhen Sotai Security Co,.Ltd
Shenzhen Sotai Security Co,.Ltd
To install equipment correctly and using equipment quickly, before using the device, please read user manual carefully. Pictures are only for reference, please take practicality as standard.
Power: 1480mAh
Size: 4.5cm*1.8cm
Net weight: 35g
Suitable groups: personal tracking, pets tracking, car/motorcycle tracking
Standby time: around 15days
Accuracy of positioning: <5M (GPS)
Positioning ways: GPS+AGPS+GSM
GSM frequency bands: 850M/900M/1800M/1900M, worldwide available
GPRS: Class12, TCP/IP
Number is bound by command. Please send SMS “CENTER,000000,your phone number#” to phone number of equipment’s SIM card ( The mobile phone number used in equipment), then equipment will reply CENTER OK automatically. That means binding is success. If it replies PASSWORD ER, that means binding is fail.
After binding, long press SOS button of equipment, equipment will dial bound phone number automatically. If vibration alarm function has been opened, alarm message will be sent to bound phone number automatically. If it is only used for positioning monitor, phone number no need to be bound.
Please send SMS “123” to phone number of equipment’s SIM card, then equipment will reply current position automatically.
Please send SMS “URL#” to phone number of equipment’s SIM card, then equipment will reply map link of current position.
(3) Vibration alarm
Please send SMS “ZD,1#” to phone number of equipment’s SIM card, then equipment will reply ZD OK. That means vibration alarm function is opened. If you want to close this function, please send SMS “ZD, 0#” to equipment.
(4)APP query
Please scan QR code in user manual or search APP in website to download and install APP.
(5)Electronic fence
You can set scope of fence by APP or computer stage. When equipment enters the scope, it will alarm to monitor.
There are many factors will influence standby time of equipment, such as using frequency, moving frequency, signal strength etc. If standby time is too short, please charge equipment for 5 hours with SIM card in it, then change mode to super-long time standby mode. The standby time will be longest.
Safe mode: real-time positioning, accuracy is very high, but it will consume very much power.
Power saving mode: It assists to positioning. Accuracy is not same in different cities. Power can be saved.
Super-long time standby mode: only when SMS is sent to change equipment to safe mode, equipment will be online. It can save much power.
SMS commands:
wkmd, 0# —- safe mode
wkmd, 1# —- power saving mode
wkmd, 2# —-super-long time standby mode
(2)Position on stage is updated slowly or no update
When position of equipment is no updates, please ensure equipment has been set to safe mode.
If equipment has been set to safe mode, and position is still not update, please send SMS “reset#” to phone number of equipment’s SIM card. It will take around 3mintues to update current position of equipment again.
When equipment with SIM card is powered on, indicator light will flicker several times, that means equipment has been powered on, then you can login and query position.
When charging power, SIM must be installed in equipment, otherwise, equipment can not be charged successfully. During charging, blue indicator light will light on, that means equipment is charging. It usually charges for 5 hours. After fully charging, blue indicator light will light off. When charging, please do not regard APP’s power percentage as standard.
If indicator light flickers all the time, please check SIM card direction is correct or not. After installing SIM card correctly, please put equipment at open outdoors and wait for 10 minutes. When equipment receive signal, it will work normally.